Forum Puppy Linux - Toutou Linux - Astuces - Aide

set ssl_starttls = no # peut être commentée si mutt ne se lance pas
set ssl_force_tls = yes
set from = 'quidam@fai.ext' # à mettre à jour avec votre adresse mail complète
set folder=//imap.fai.ext # remplacer fai.ext (i.e., par wanadoo.fr)
set include=yes
set realname=`echo $from | cut -d"@" -f1`
set mailcap_path=/root/.mutt/.mailcap 
# IMAP paramètres
set imap_user = $from  
set imap_pass = 
# SMTP paramètres 
set smtp_url = "smtps://${from}@smtp.fai.ext"  # remplacer fai.ext  (i.e., par wanadoo.fr)
set smtp_pass = "$imap_pass"
set signature = "/root/.mutt/signature"
source /root/.mutt/adresses
# Dossier distants
set folder = "imaps://imap.fai.ext"  # remplacer fai.ext  (i.e., par wanadoo.fr)
set spoolfile = "+INBOX"  
set postponed = "+INBOX/Drafts"  
set record = "+INBOX/Sent" 
set trash = "+INBOX/Trash" 
set editor = "leafpad"
# Barre latérale
set sidebar_width=12 
set sidebar_visible=yes 
set sidebar_delim_chars='|' 
set sidebar_sort_method=unsorted
# ctrl-n, ctrl-p pour sélectionner le dossier suivant, précédent 
# ctrl-o pour ouvrir le dossier sélectionné 
bind index,pager \CP sidebar-prev 
bind index,pager \CN sidebar-next 
bind index,pager \CO sidebar-open 
# Boîtes à lettres
mailboxes -label "Arrivé" $spoolfile \
  -label "Envoyé" $record \
  -label "Brouillons" $postponed \
  -label "Lazaret" "+INBOX/QUARANTAINE" \
  -label "Corbeille" $trash
# Gestion réponse, transfert
set fast_reply = yes
set attribution = "Le %d, %n a écrit :"
set forward_quote = yes 
set forward_attribution_intro = "----- Message transféré de %f -----"
set forward_attribution_trailer = "----- Fin du message transféré -----"
set date_format="%A %d %B %Y à %H:%M:%S"
# ne pas utiliser gpgme
unset crypt_use_gpgme
source /root/.mutt/gpg.rc
source /root/.mutt/smime.rc
# ne pas utiliser gpg_agent uniquement si version gpg < 2.1.0, sinon commenter ou supprimer cette ligne et la suivante
unset pgp_use_gpg_agent

# -*-muttrc-*-
#
# Command formats for gpg.
#
# Some of the older commented-out versions of the commands use gpg-2comp from:
#  http://70t.de/download/gpg-2comp.tar.gz
#
# %p    The empty string when no passphrase is needed,
#      the string "PGPPASSFD=0" if one is needed.
#
#      This is mostly used in conditional % sequences.
#
# %f    Most PGP commands operate on a single file or a file
#      containing a message.  %f expands to this file's name.
#
# %s    When verifying signatures, there is another temporary file
#      containing the detached signature.  %s expands to this
#      file's name.
#
# %a    In "signing" contexts, this expands to the value of the
#      configuration variable $pgp_sign_as, if set, otherwise
#      $pgp_default_key.  You probably need to
#      use this within a conditional % sequence.
#
# %r    In many contexts, mutt passes key IDs to pgp.  %r expands to
#      a list of key IDs.


# Section A: Key Management

# The default key for encryption (used by $pgp_self_encrypt and
# $postpone_encrypt).
#
# It will also be used for signing unless $pgp_sign_as is set to a
# key.
#
# Unless your key does not have encryption capability, uncomment this
# line and replace the keyid with your own.
#
set pgp_default_key="0x12345678"

# If you have a separate signing key, or your key _only_ has signing
# capability, uncomment this line and replace the keyid with your
# signing keyid.
#
set pgp_sign_as="0x87654321"


# Section B: Commands

# Note that we explicitly set the comment armor header since GnuPG, when used
# in some localiaztion environments, generates 8bit data in that header, thereby
# breaking PGP/MIME.

# decode application/pgp
set pgp_decode_command="gpg --status-fd=2 %?p?--passphrase-fd 0? --no-verbose --quiet --batch --output - %f"

# verify a pgp/mime signature
set pgp_verify_command="gpg --status-fd=2 --no-verbose --quiet --batch --output - --verify %s %f"

# decrypt a pgp/mime attachment
set pgp_decrypt_command="gpg --status-fd=2 %?p?--passphrase-fd 0? --no-verbose --quiet --batch --output - %f"

# create a pgp/mime signed attachment
# set pgp_sign_command="gpg-2comp --comment '' --no-verbose --batch --output - %?p?--passphrase-fd 0? --armor --detach-sign --textmode %?a?-u %a? %f"
set pgp_sign_command="gpg --no-verbose --batch --quiet --output - %?p?--passphrase-fd 0? --armor --detach-sign --textmode %?a?-u %a? %f"

# create a application/pgp signed (old-style) message
# set pgp_clearsign_command="gpg-2comp --comment '' --no-verbose --batch --output - %?p?--passphrase-fd 0? --armor --textmode --clearsign %?a?-u %a? %f"
set pgp_clearsign_command="gpg --no-verbose --batch --quiet --output - %?p?--passphrase-fd 0? --armor --textmode --clearsign %?a?-u %a? %f"

# create a pgp/mime encrypted attachment
# set pgp_encrypt_only_command="pgpewrap gpg-2comp -v --batch --output - --encrypt --textmode --armor --always-trust -- -r %r -- %f"
set pgp_encrypt_only_command="pgpewrap gpg --batch --quiet --no-verbose --output - --encrypt --textmode --armor --always-trust -- -r %r -- %f"

# create a pgp/mime encrypted and signed attachment
# set pgp_encrypt_sign_command="pgpewrap gpg-2comp %?p?--passphrase-fd 0? -v --batch --output - --encrypt --sign %?a?-u %a? --armor --always-trust -- -r %r -- %f"
set pgp_encrypt_sign_command="pgpewrap gpg %?p?--passphrase-fd 0? --batch --quiet --no-verbose --textmode --output - --encrypt --sign %?a?-u %a? --armor --always-trust -- -r %r -- %f"

# import a key into the public key ring
set pgp_import_command="gpg --no-verbose --import %f"

# export a key from the public key ring
set pgp_export_command="gpg --no-verbose --export --armor %r"

# verify a key
set pgp_verify_key_command="gpg --verbose --batch --fingerprint --check-sigs %r"

# read in the public key ring
# note: the second --with-fingerprint adds fingerprints to subkeys
set pgp_list_pubring_command="gpg --no-verbose --batch --quiet --with-colons --with-fingerprint --with-fingerprint --list-keys %r"

# read in the secret key ring
# note: the second --with-fingerprint adds fingerprints to subkeys
set pgp_list_secring_command="gpg --no-verbose --batch --quiet --with-colons --with-fingerprint --with-fingerprint --list-secret-keys %r"

# fetch keys
# set pgp_getkeys_command="pkspxycwrap %r"

# pattern for good signature - may need to be adapted to locale!

# set pgp_good_sign="^gpgv?: Good signature from "

# OK, here's a version which uses gnupg's message catalog:
# set pgp_good_sign="`gettext -d gnupg -s 'Good signature from "' | tr -d '"'`"

# This version uses --status-fd messages
set pgp_good_sign="^\\[GNUPG:\\] GOODSIG"

# pattern to verify a decryption occurred
# This is now deprecated by pgp_check_gpg_decrypt_status_fd:
# set pgp_decryption_okay="^\\[GNUPG:\\] DECRYPTION_OKAY"
set pgp_check_gpg_decrypt_status_fd

# -*-muttrc-*-
## The following options are only available if you have
## compiled in S/MIME support

# If you compiled mutt with support for both PGP and S/MIME, PGP
# will be the default method unless the following option is set
# set smime_is_default

# Uncomment this if you don't want to set labels for certificates you add.
# unset smime_ask_cert_label

# Passphrase expiration
# set smime_timeout=300

# Global crypto options -- these affect PGP operations as well.
# set crypt_autosign = yes
# set crypt_replyencrypt = yes
# set crypt_replysign = yes
# set crypt_replysignencrypted = yes
# set crypt_verify_sig = yes


# Section A: Key Management

# The default keyfile for encryption (used by $smime_self_encrypt and
# $postpone_encrypt).
#
# It will also be used for decryption unless
# $smime_decrypt_use_default_key is unset.
#
# It will additionally be used for signing unless $smime_sign_as is
# set to a key.
#
# Unless your key does not have encryption capability, uncomment this
# line and replace the keyid with your own.
#
set smime_default_key="12345678.0"

# If you have a separate signing key, or your key _only_ has signing
# capability, uncomment this line and replace the keyid with your
# signing keyid.
#
set smime_sign_as="87654321.0"

# Uncomment to make mutt ask what key to use when trying to decrypt a message.
# It will use the default key above (if that was set) else.
# unset smime_decrypt_use_default_key

# Path to a file or directory with trusted certificates
set smime_ca_location="~/.smime/ca-bundle.crt"

# Path to where all known certificates go. (must exist!)
set smime_certificates="~/.smime/certificates"

# Path to where all private keys go. (must exist!)
set smime_keys="~/.smime/keys"

# These are used to extract a certificate from a message.
# First generate a PKCS#7 structure from the message.
set smime_pk7out_command="openssl smime -verify -in %f -noverify -pk7out"

# Extract the included certificate(s) from a PKCS#7 structure.
set smime_get_cert_command="openssl pkcs7 -print_certs -in %f"

# Extract the signer's certificate only from a S/MIME signature (sender verification)
set smime_get_signer_cert_command="openssl smime -verify -in %f -noverify -signer %c -out /dev/null"

# This is used to get the email address the certificate was issued to.
set smime_get_cert_email_command="openssl x509 -in %f -noout -email"

# Add a certificate to the database using smime_keys.
set smime_import_cert_command="smime_keys add_cert %f"



# Section B: Outgoing messages

# Algorithm to use for encryption.
# valid choices are aes128, aes192, aes256, rc2-40, rc2-64, rc2-128, des, des3
set smime_encrypt_with="aes256"

# Encrypt a message.  Input file is a MIME entity.
set smime_encrypt_command="openssl cms -encrypt -%a -outform DER -in %f %c"

# Algorithm for the signature message digest.
# Valid choices are md5, sha1, sha224, sha256, sha384, sha512.
set smime_sign_digest_alg="sha256"

# Sign.
set smime_sign_command="openssl smime -sign -md %d -signer %c -inkey %k -passin stdin -in %f -certfile %i -outform DER"



# Section C: Incoming messages

# Decrypt a message.  Output is a MIME entity.
set smime_decrypt_command="openssl cms -decrypt -passin stdin -inform DER -in %f -inkey %k -recip %c"

# Verify a signature of type multipart/signed
set smime_verify_command="openssl smime -verify -inform DER -in %s %C -content %f"

# Verify a signature of type application/x-pkcs7-mime
set smime_verify_opaque_command="\
openssl smime -verify -inform DER -in %s %C || \
openssl smime -verify -inform DER -in %s -noverify 2>/dev/null"

# application/pkcs7-mime ".p7m" messages should have a smime-type
# parameter to tell Mutt whether it's signed or encrypted data.
#
# If the parameter is missing, Mutt by default assumes it's SignedData.
# This can be used to change Mutt's assumption to EnvelopedData (encrypted).
#
# set smime_pkcs7_default_smime_type="enveloped"



# Section D: Alternatives

# Sign.  If you wish to NOT include the certificate your CA used in signing
# your public key, use this command instead.
# set smime_sign_command="openssl smime -sign -md %d -signer %c -inkey %k -passin stdin -in %f -outform DER"
#
# In order to verify the signature only and skip checking the certificate chain:
#
# set smime_verify_command="openssl smime -verify -inform DER -in %s -content %f -noverify"
# set smime_verify_opaque_command="openssl smime -verify -inform DER -in %s -noverify"
#

-----BEGIN PGP SIGNATURE-----

iQEcBAEBAgAGBQJp6dbmAAoJEEise3OhdFfPO5gH/iipA2QyVgnsG6w1eo5E72kf
K/iMnVxwB1yZGLQO2kK5CeTaiT+7oFKVYRLeFyL/0IaGR+WeVwhMJqdY0rgoxPo5
8jSQ6Xfnf93qIbk8TciqfgCD/YVu5udNkmHOxNE2x3z579RrPZVLZpOA4FfeYXgv
TmwXPGmY/3EwpIZAM7du8n+diSbGtQzCPfmrdHZDA8PgdXIJyEZLVKvm9un8eYKE
nhHsh+oyW+/iJM/ugKqEC6kgKLX9FvpHcySU+MI4i+xiC/iL1tk01l1Qn4cNHwGz
r6OuyBKZzXhuNvAGZJdjkauzV4INn+Yby8Rz8s90r6lYIzcvQCHrkVC+Pnsl4FE=
=H1JB
-----END PGP SIGNATURE-----